IF01094

Recovery Console Available commands.

HELP

Use the help command to list all the following supported commands:

attrib del fixboot more set batch delete fixmbr mkdir systemroot bootcfg dir format more type cd disable help net chdir diskpart listsvc rd chkdsk enable logon ren cls exit map rename copy expand md rmdir

ATTRIB

Use the attrib command with one or more of the following parameters to change the attributes of a file or a folder:

-R

+R

-S

+S

-H

+H

-C

+C

Notes:

+ : Sets an attribute

- : Resets an attribute

R : Read-only file attribute

S : System file attribute

H : Hidden file attribute

C : Compressed file attribute

You must set or clear at least one attribute.

To view attributes, use the dir command.

BATCH

batch inputfile [outputfile]

Use this command to run commands that are specified in a text file. In the command syntax, inputfile specifies the text file that contains the list of commands to be run, and outputfile specifies the file that contains the output of the specified commands. If you do not specify an output file, the output appears on the screen.

BOOTCFG

 Use this command for boot configuration and recovery. This command has the following options:

bootcfg /add

bootcfg /rebuild

bootcfg /scan

bootcfg /list

bootcfg /disableredirect

bootcfg /redirect [portbaudrate] | [useBiosSettings]

Examples:

bootcfg /redirect com1 115200

bootcfg /redirect useBiosSettings

You can use the following options:

/add : Adds a Windows installation to the boot menu list.

/rebuild : Iterates through all Windows installations so that you can specify which installations to add.

/scan : Scans all disks for Windows installations and displays the results so that you can specify which installations to add.

/default : Sets the default boot entry.

/list : Lists the entries already in the boot menu list.

/disableredirect : Disables redirection in the boot loader.

/redirect : Enables redirection in the boot loader, with the specified configuration.

CD and CHDIR

Use the cd and chdir commands to change to a different folder. For example, you can use the following commands:

Type cd .. to change to the parent folder.

Type cd drive: to display the current folder in the specified drive.

Type cd without parameters to display the current drive and folder.

The chdir command treats spaces as delimiters. Because of this, you must put quotation marks ("") around a folder name that contains a space, for example:

cd "\windows\profiles\username\programs\start menu"

The chdir command works only in the system folders of the current installation of Windows, in removable media, in the root folder of any hard disk partition, or in the local installation sources.

CHKDSK

chkdsk drive /p /r

The chkdsk command checks the specified drive and repairs or recovers the drive if the drive requires it.The command also marks any bad sectors and it recovers readable information.

You can use the following options:

/p : Does an exhaustive check of the drive and corrects any errors.

/r : Locates bad sectors and recovers readable information.

Note If you specify the /r option, the /p option is implied. When you specify the chkdsk command without arguments, the command checks the current drive with no options in effect.

When you run the chkdsk command, you are required to use the Autochk.exe file. CHKDSK automatically locates this file in the startup folder. If the Command Console was preinstalled, the startup folder is typically the Cmdcons folder. If CHKDSK cannot find Autochk.exe in the startup folder, CHKDSK tries to locate the Windows CD-ROM installation media. If it cannot find the installation media, CHKDSK prompts you for the location of the Autochk.exe file.

CLS

Use this command to clear the screen.

COPY

copy source destination

Use this command to copy a file. In the command syntax, source specifies the file to copy and destination specifies the folder or file name for the new file. You cannot use wildcard characters indicated by an asterisk (*), and you cannot copy a folder. If you copy a compressed file from the Windows CD-ROM, the file is automatically decompressed at the same time it is copied.

The source of the file can be removable media, any folder in the system folders of the current Windows installation, the root of any drive, the local installation sources, or the Cmdcons folder.

If destination is unspecified, the default destination is the current folder. If the file already exists, you are prompted whether you want the copied file to overwrite the existing file. The destination cannot be removable media.

DEL and DELETE

 del drive: path filename

delete drive: path filename

Use this command to delete a file. In the command syntax, drive: path filename specifies the file that you want to delete. The delete command works only in the system folders of the current Windows installation, in removable media, in the root folder of any hard disk partition, or in the local installation sources. The delete command does not accept wildcard characters.

DIR

 dir drive: path filename

Use this command to display a list of files and subfolders in a folder. In the command syntax, drive: path filename specifies the drive, folder, and files to list. The dir command lists all files, including hidden and system files. Files can have the following attributes:

D : Directory

H : Hidden file

S : System file

E : Encrypted

R : Read-only file

A : Files ready for archiving

C : Compressed

P : Reparse point

The dir command works only in the system folders of the current Windows installation, in removable media, in the root folder of any hard disk partition, or in the local installation sources.

DISABLE

 disable servicename

Use this command to disable a Windows system service or driver. In the command syntax, servicename specifies the name of the service or driver that you want to disable.

Use the listsvc command to display all services or drivers that are eligible to be disabled. The disable command prints the old start type of the service before resetting the start type to SERVICE_DISABLED. Record the old start type if you must enable the service again.

The disable command displays the following start_type values:

SERVICE_DISABLED

SERVICE_BOOT_START

SERVICE_SYSTEM_START

SERVICE_AUTO_START

SERVICE_DEMAND_START

DISKPART

 diskpart /add /delete device_name drive_name partition_name size

Use this command to manage the partitions on your hard disk volumes. You can use the following options:

/add : Creates a new partition.

/delete : Deletes an existing partition.

device_name : The name of the device that is used to create a new partition.

drive_name : A drive-letter-based name, for example D:.

partition_name : The partition-based name for deleting an existing partition.

size : The size of the new partition in megabytes.

You can determine the device name from the output of the MAP command, for example, \Device\HardDisk0. You can use the partition name instead of the drive name argument, for example, \Device\HardDisk0\Partition1. If you use no arguments, a user interface for managing your partitions appears.

Warning If you use this command, you can damage the partition table if the disk has been upgraded to a dynamic disk configuration. Do not modify the structure of dynamic disks unless you are using the Disk Management tool.

ENABLE

enable servicename start_type

You can use the enable command to enable a Windows system service or driver.

Use the listsvc command to display all eligible services or drivers to enable. The enable command prints the old start type of the service before resetting it to the new value. It is a good idea to note the old value, in case you have to restore the start type of the service.

Valid options for start_type are:

SERVICE_BOOT_START

SERVICE_SYSTEM_START

SERVICE_AUTO_START

SERVICE_DEMAND_START

If you do not specify a new start type, the enable command prints the old start type for you.

EXIT

Use the exit command to quit the Recovery Console and restart your computer.

EXPAND

expand source [/F:filespec] [destination] [/y]

expand source [/F:filespec] /D

Use this command to expand a file. In the command syntax, source specifies the name of the file to be expanded and destination specifies the folder for the new file. If you do not specify a destination, the command defaults to the current folder. You cannot include wildcard characters.

You can use the following options:

/y : Do not prompt before overwriting an existing file.

/f:filespec : Identifies the files to be expanded.

/d : Do not expand; display only a directory of the files in the source.

If the source contains more than one file, you must use the /f:filespec parameter to identify the specific files to be expanded. You can include wildcard characters.

The destination can be any folder in the system folders of the current Windows installation, in the root of the drive, in the local installation sources, or in the Cmdcons folder. The destination cannot be removable media, and the destination file cannot be read-only. Use the attrib command to remove the read-only attribute.

Unless you use the /y option, the expand command prompts you if the destination file already exists.

FIXBOOT

fixboot drive name:

Use this command to write the new Windows boot sector code on the system partition. In the command syntax, drive name is the drive letter where the boot sector will be written. This command fixes damage in the Windows boot sector. This command overrides the default setting, which writes to the system boot partition. The fixboot command is supported only on x86-based computers.

FIXMBR

fixmbr device name

Use this command to repair the MBR of the boot partition. In the command syntax, device name is an optional device name that specifies the device that requires a new MBR. Use this command if a virus has damaged the MBR and Windows cannot start.

Warning This command can damage your partition tables if a virus is present or if a hardware problem exists. If you use this command, you may create inaccessible partitions. We recommend that you run antivirus software before you use this command.

You can obtain the device name from the output of the map command. If you do not specify a device name, the MBR of the boot device is repaired, for example:

fixmbr \device\harddisk2

If the fixmbr command detects an invalid or non-standard partition table signature, fixmbr command prompts you for permission before rewriting the MBR. The fixmbr command is supported only on x86-based computers.

FORMAT

format drive: /Q /FS:file-system

Use this command to format the specified drive to the specified file system. In the command syntax, /Q performs a quick format of the drive, drive is the drive letter of the partition to format, and /FS:file-system specifies the type of file system to use such as FAT, FAT32, or NTFS. If you do not specify a file system, the existing file system format is used if it is available.

LISTSVC

The listsvc command lists all available services, drivers, and their start types for the current Windows installation. This command is useful in conjunction with the disable and enable commands.

The list is extracted from the %SystemRoot%\System32\Config\System hive. If the System hive is damaged or missing, the results are unpredictable.

LOGON

logon

The logon command lists all detected installations of Windows and then requests the local administrator password for the copy of Windows that you want to log on to. If your first three tries to log on do not succeed, the console quits, and your computer restarts.

MAP

map arc

Use this command to list drive letters, file system types, partition sizes, and mappings to physical devices. In the command syntax, the arc parameter tells the map command to use ARC paths instead of Windows Device paths.

MD and MKDIR

The md and mkdir commands create new folders. Wildcard characters are not supported. The mkdir command works only in the system folders of the current installation of Windows, in removable media, in the root folder of any hard disk partition, or in the local installation sources.

MORE

more filename

Use this command to display a text file to the screen.

NET

 Although the Help file states otherwise, the net command is not usable from the Recovery Console. The protocols stack is not loaded for the Recovery Console. Therefore, there is no networking function available.

RD and RMDIR

Use rd and rmdir commands to delete a folder. These commands work only in the system folders of the current Windows installation, in removable media, in the root folder of any hard disk partition, or in the local installation sources.

REN and RENAME

Use the ren and rename commands to rename a file.

Note You cannot specify a new drive or path for the renamed file. These commands work only in the system folders of the current Windows installation, in removable media, in the root folder of any hard disk partition, or in the local installation sources.

SET

You can use the set to display or modify four environment options.

AllowWildCards = FALSE AllowAllPaths = FALSE AllowRemovableMedia = FALSE NoCopyPrompt = FALSE

SYSTEMROOT

The systemroot command sets the current working folder to the %SystemRoot% folder of the Windows installation that you are currently logged on to.

TYPE

type filename

Use the type command to display a text file.

APPLIES TO

• Microsoft Windows XP Home Edition

Did this Article Give you the Information You Were Looking For?

If you found this information useful, please