Virtual Private Network for Secure Internet Data Transfer

To make a VPN connection

1.

Open Network Connections. (Click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections.)

2.

Under Network Tasks, click Create a new connection, and then click Next.

3.

On the Welcome to the New Connection Wizard page of the New Connection Wizard, click Next.

4.

On the Network Connection Type page, click Connect to the network at my workplace, and then click Next as shown below.

5.

On the Network Connection page, click Virtual Private Network connection, and then click Next as shown below.

6.

On the Connection Name page, type the name of the connection or your company name, and then click Next. An example is shown below.

7.

If you are using a dial-up connection to an ISP to connect to the Internet, the Public Network page is displayed. In Automatically dial this initial connection, select the name of the connection used to dial your ISP, and then click Next. An example is shown below.

8.

On the VPN Server Selection page, type the Domain Name System (DNS) name or Internet Protocol (IP) address of your company's VPN server on the Internet, and then click Next. An example is shown below.

9.

On the Completing the New Connection Wizard page, click Finish.

10.

A Connect dialog box is displayed. Type the user name and password to access your company's private network and then click Connect. An example is shown below.

 

Hit Counter

All products mentioned are registered trademarks or trademarks of their respective companies.
Questions or problems regarding this web site should be directed to the Webmaster.
Copyright 1999-2010 Internet Fixes. All rights reserved.      
Legal Disclaimer

This Site Is Part Of The Internet Fixes Network!